User's Manual

Figure 5-16
Modify Static Route
To modify an access restriction rule, perform the following steps:
1. Choose Firewall>Static Route.
2. Choose the item to be modified, and click Edit.
3. Repeat steps 3 through 5 in the previous procedure.
4. Click Submit. As shown in Figure 5-17.
Figure 5-17
Delete Static Route
To delete a static route, perform the following steps:
Choose Firewall>Static Route.
Choose the item to be deleted, and click Delete.
5.3 Firewall
Setting Firewall
This page describes how to set the firewall. If you enable or disable the firewall, you can modify the
configuration.
To set the firewall, perform the following steps:
Choose Firewall>Firewall Setting.
Choose Enable or Disable to modify the configuration.
Click Submit. As shown in Figure 5-18.