User's Manual

In the LAN Status area, view the LAN status, such as Mac address, IP address and Subnet mask. As
shown in Figure 5-3.
Figure 5-3
5.2 Viewing Network
Network Mode
To set the network mode, perform the following steps:
Choose Network >WAN Settings;
In the Network Mode area, select a mode between NAT and ROUTER;
Click Submit. As shown in Figure 5-4.
Figure 5-4
LTE Settings
Settings
To set the LTE network, perform the following steps:
1. Choose Network >LTE Settings;
2. In the Settings area, you can set the configuration of LTE network;
3. In the Status area, you can view the LTE network connect status, such as Frequency, RSSI, RSRP,
RSRQ, CINR, SINR, Cell ID and so on. As shown in Figure 5-5.