User's Manual

LBS7320 Outdoor LTE TDD Base Station User’s Manual
31
4.6 Install Antenna Feeder System
4.6.1 Requirement for Antennal Installing
General requirements

The installation height and azimuth of the antenna should meet the design
requirements. The directional antenna should be directed by a compass to
ensure correct pointing.

Suitable antenna installation should be adopted in accordance with the
environmental conditions in the construction area, meeting the requirements of
antenna strength.

It is strictly forbidden to climb and install the antenna in harsh conditions such as
thunderstorm, gale, ice and snow, low visibility, high temperature and low
temperature and so on.

Ensure that the antenna is within the protection area ᣆ昰

of the lightning rod.
4.6.2 Installation of Directional Antenna
1. First, assemble the installer as shown in Figure 3-11
Figure 3-11 Installer Assembling Procedure of Directional Antennas
2. To install the antenna on the tower, pulleys are used to transmit the assembled
antenna to the platform on the tower, as shown in Figure 3-12. Observe safety
rules at these high levels of work.