User's Manual

LBS7320 Outdoor LTE TDD Base Station User’s Manual
26
4.4.2 Hanging wall installation
The wall must bear four times the weight of the base station.
1. Fix the installer on the wall and indicate the location of the drilling locations.
Figure 3-6 The position of installation hole on wall
Caution:
The arrow of the installer must be upward.
2. Drill four 12mm diameter holes with the depth of 50mm at the marked
location .
3. Check the direction of the installer, then fix the installer to the wall with
M10*60 expansion screws.
4. Refer to the installation steps about hold pole installation, fix the base station on
wall.