User's Manual

LBS7320 Outdoor LTE TDD Base Station User’s Manual
21
3.5 Waterproof Protection
The outer interface of LBS7320 adopts waterproof tape for waterproof protection
such as antenna interface. Before winding the waterproof tape, clean up the
interface first. The waterproof protection steps are as follows:
1. Wrap a layer of PVC insulating tape. The adhesive tape should be wound up
from bottom to top layer by layer.
2. Wrap three layers of waterproof tape. The tape should be winded layer by
layer from bottom to top, then from top to bottom, and finally from bottom to top.
After each winding is finished, the bottom tape should be pinched by hand to
ensure waterproofing.
3. Wrap three layers of PVC insulating tape. The tape should be winded layer
by layer from bottom to top, then from top to bottom, and finally from bottom to top.
After each winding is finished, the bottom tape should be pinched by hand to
ensure waterproofing.
CAUTION:
Waterproof tape winding requires each ring of waterproof tape covered with
1/2 of the front ring waterproof tape, the joint wrapped looks round and full.
The shape is beautiful and conical.