User's Manual

LBS7320 Outdoor LTE TDD Base Station User’s Manual
2
About This Document
This document is a guidance of LBS7320 hardware installation for installation
personnel, including the preparation of installation tools and supporting materials,
the demands for installation environment, installation procedure, cable
connection and power on.
Accomplish the installation of the device according to this guide, the installation
personnel can avoid potential damage to the device during the installation
procedure, which makes sure the subsequent good running of the device.
Copyright Notice
Leax copyrights this specification. No part of this specification may be
reproduced in any form or means, without the prior written consent of Leax.
Disclaimer
This specification is preliminary and is subject to change at any time without
notice. Leax assumes no responsibility for any errors contained herein. For more
information, please consult our technical engineers.
FCC Certifications
FCC ID：2AVFNLBS7320
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE:
FCC radiation exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 60cm between the radiator & your body.
Federal Communication Commission Interference Statement