User Guide

Battery Information
Installing or Replacing Batteries
WARNING! To avoid battery leakage, please follow these instructions
carefully. Failure to follow these instructions can result in battery acid
leakage that may cause burns, personal injury, and property damage.
Requires: 3 x 1.5V AAA batteries and a Phillips screwdriver
• Batteries should be installed or replaced by an adult.
• Count & Color Electronic Flash Card
™
requires (3) three AAA batteries.
• The battery compartment is located on the back of the unit.
• To install batteries, rst undo the screw with a Phillips screwdriver and
remove the battery-compartment door. Install batteries as indicated
inside the compartment.
• Replace compartment door and secure with screw.
Battery Care and Maintenance Tips
• Use (3) three AAA batteries.
• Be sure to insert batteries correctly (with adult supervision) and always
follow the toy and battery manufacturer’s instructions.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-
cadmium) batteries.
• Do not mix new and used batteries.
• Insert battery with the correct polarity. Positive (+) and negative (-) ends
must be inserted in the correct directions as indicated inside the battery
compartment.