Games Teacher's Guide

OPERATING EGGSPERT WITH BATTERIES

For the best operation, always use fresh alkaline batteries. Other battery types

will have a shorter life.

1. Carefully open the battery compartment door located on the bottom of

EGGSPERT by loosening the screw holding it in place.

2. Install four fresh AA-cell (DC 1.5v) batteries in EGGSPERT’s battery

compartment, carefully following the diagram showing correct battery

installation. This diagram is found inside the battery compartment.

• Batteries must be inserted with the correct polarity.

• Do not mix old and new batteries. Do not mix alkaline, standard

(carbon-zinc), or rechargeable (nickel-cadmium) batteries.

• Remove exhausted batteries from the unit.

• The supply terminals must not be short-circuited.

• Non-rechargeable batteries must not be recharged.

• Do not use rechargeable batteries.

• Only batteries of the same or equivalent type as recommended are to

be used.

3. Close the battery compartment door and tighten screw.