Operation Manual

Manual Leapfrog Creatr
42 Leapfrog BV
 Now that the selected files are combined, a new window will pop up to save the new combined
file. Browse to the location you wish to save this file. Give it a name and save it. It will be saved
amf file
 Now load the “.amf file in Slic3r software by clicking “Add..”. When you have added the “.amf
file” in Slic3r you have to press the button -Give it a name and save it on your
computer. Make sure you select the preferred print settings and filaments before you Export the
G-code!
*Note: The first “.stl file” you’ve loaded to create your “.amf file” will be printed with extruder 1.
In this case it will be ABS black.
 Now load the G-Code in Repetier-Host Leapfrog and you can start printing