Owner manual

12
Fig 6
Fig 5
C. Install Battery:
1. Place the mounting deck onto
the rail.
2. Adjust the mounting deck position
until you are satisied with the view.
3. Tighten each locking nut with a
screwdriver or coin as shown in Fig. 4.
B2. Install the Dot Sight onto the Rie:
( for Dot Sights with Locking Nuts )
Fig 4
1. The battery is housed inside the
Red/Green Illumination Rheostat.
Fig.5 and Fig.6 show where
the battery compartment is on 2
representative congurations.
2. Firmly hold the housing of the
Rheostat with 2 ngers.
3. Use your other hand to open
the battery compartment by
unscrewing the top cap.