SS Series stretch sensor Datasheet

Sensitivity (nominal)
0.05V / mm stretch
Temperature factor
-0.15% / °C
Output signal
0 to 5V
Update rate
1000Hz
Supply voltage
2.25 to 5.25 V
Power consumption
0.175W
Maximum linear stretch
80mm (80%)
Ope
rating temperature 0 to 70°C
Protection
rating Equivalent to IP67
Fatigue life
10
6
cycles @ 80% strain
Weight (not including cable)
<10g
Electrical (SG-B only)
Mechanical
Stretch sensors are designed to be attached or tethered by their attachment area. The attachment part of
the sensors is made from a nonwoven textile which together with the rest of the sensor, carries the final
silicone coating.
It is possible to use sewing, clamping, eyelets for screws and the like for attaching the sensor to its host
structure.
As is the case with the SG series strain gauge, stretch sensors can also be glued to a substrate along their
entire length. See SG series datasheet for more information.