Owner's Manual
Page 8
Operation-1
SWITCHING ON AND OFF
Connect the mains lead plug to the mains socket and then turn on the rear power switch. The CDT will power-on in the standby state. The red power indicator
on the front panel will be illuminated.
STANDBY MODE
To exit the standby mode, press the button of the LEAK CDT remote control or press the power button on the front panel of the CDT. The front panel
display will show the LEAK CDT welcome screen.
You can activate the ‘auto standby’ function by holding down the POWER button on the front panel for a few seconds, then select the function you want,
from the list below, with a short press of the POWER button.
Standby 20Min (Default)
The Standby indicator flashes twice: Auto-Standby after 20 minutes of inactivity. The LEAK CDT will automatically go into Standby mode if there is no signal
input or operation for 20 minutes.
Standby 1 HOUR
The Standby indicator flashes three times. Auto-Standby after1 hour of inactivity. The LEAK CDT will automatically go into Standby mode if there is no signal
input or operation for 1 hour.
Standby Never
The Standby indicator flashes once: Auto-Standby Never. The LEAK CDT will not go into Standby mode.
CHOOSE MEDIA PLAYBACK MODE
Press the INPUT button on the remote control or the CDT front panel to choose which media to play.
Disc: Choose to play a compact disc. (’No Disc’ will show when drawer is empty)
USB: Choose to play from a USB memory device (”No Drive” will be shown if a USB memory device is not connected.)
CD PLAYBACK
Insert a disc into the CD slot. Disc information will be shown after the disc is read.
Press remote control or front panel button to eject the disc.
Direct selection of the tracks from the remote control
Select your desired track number directly from the remote key pad. The disc will play forward from the chosen track. If you choose a single-digit track (e.g.1)
in a disc which contains more than 10 tracks, the player will pause briefly, waiting for you to enter a second digit. If none is entered, play will commence
from the entered single-digit track. If the choice is invalid the display reverts to the previous state.
Press the Repeat key on the handset to repeat single track or all the tracks on the disc continuously.
REPEAT PLAY
RANDOM PLAY
Press the remote control RANDOM button to choose random playback of all tracks.
PROGRAMMING PLAYBACK
Set a custom programmed playback track order. Programming mode can only be utilised when the CD is not playing.
First, enter the programming mode by pressing the remote control PROG button. Navigate to the desired track, then press STORE to save the selected track.
Repeat this process with your next desired tracks to complete your programmed playback order.
Press button to stop playing the programmed track. Once your programmed playback order is finished, the LEAK CDT will stop. Press the stop button
twice or press the RANDOM button to exit programming mode.
Press button to play the programmed track.
Play/Pause
Previous/Next song; Repeat play of the existing track by pressing the Previous button once. Play the previous track by pressing twice.
Stop playing
Press and hold to fast reverse/fast forward search
‘CDT’
CD PLAYER WITH USB
INSTALLATION - OPERATION - MAINTENANCE