Owner's Manual

‘CDT’
CD PLAYER WITH USB
INSTALLATION - OPERATION - MAINTENANCE
Page 7
Connection
DIGITAL, COAXIAL AND OPTICAL OUTPUTS
The LEAK CDT has one coaxial and one optical SPDIF digital output. Connect a suitable digital coaxial (fully screened) interconnect or optical cable from the
appropriate SPDIF output of the LEAK CDT to the input of a DAC or digital input on your amplifier or preamplifier, as per the example illustrated below.
FUSE T630mA 250V
USE ONLY WITH A 250V FUSE
ON OFF
STEREO 130
TRIG
12V
IN
LINK
OUT IN
OPT
OPT 2 OPT 1CO AX
COA X
USB
UPDATE
+
RIGHT LEFT
PREAUX 2
PHONO
IN OU T
SER IAL NO.
TRIGGER CONNECTIONS
The LEAK CDT back panel has a pair of standard 12V trigger output connectors which can connect to LEAK STEREO 130, or 12V trigger input connector of
any other audio device. This will enable universal control for power-on/ power-off of the Trigger connected devices. A 3.5mm audio cable should be used to
connect the 12v trigger devices (master and slave).
FUSE T630mA 250V
USE ONLY WITH A 250V FUSE
ON OFF
STEREO 130
TRIG
12V
IN
LINK
OUT IN
OP T
OPT 2 O PT 1COA X
COA X
USB
UPDATE
+
RIGHT LEFT
PR EAU X2
PHONO
IN OU T
SE RI AL NO .