Owner's Manual

Getting Started
PLACEMENT
The unit must be mounted on a solid, level and stable surface.
Before you connect the LEAK CDT to the AC mains power, ensure your AC mains voltage corresponds to the rating on the rear panel of the product. If in
doubt, consult your dealer. If you move to an area which has a different mains voltage, seek advice from a LEAK appointed dealer or a competent service
technician.
INTRODUCTION
FEATURES
• Display on/off options
• USB memory storage device playback (MP3/WMA/AAC/WAV)
• Automatic equipment activation via 12V trigger output
• CD/CD-R/CD-RW compatibility
• Auto standby function with function on/off option
Note: The LEAK CDT should be used with the DIGl or OPT outputs connected directly to a preamplifier with inbuilt DAC. Compatible with 120mm (4.73-inch)
CDs only.
UNPACKING THE EQUIPMENT
Unpack the product fully. The carton should contain:
• The LEAK CDT player
• One IEC power cord suitable for your area
• One remote handset
• The LEAK CDT user manual
Consult the dealer from whom you purchased the equipment if any item is not present.
Carefully unpack the unit and accessories. Take care not to damage the surface finish when undoing the protective polythene sleeve. Retain the packing
materials for future use. Retain the user manual and information concerning the date and place of purchase of your equipment for future reference. If you transfer
the unit to a third party please pass on this instruction manual along with the equipment.
The LEAK CDT is a high-performance CD player with USB storage device playback functionality.
To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future
reference.
Page 4
‘CDT’
CD PLAYER WITH USB
INSTALLATION - OPERATION - MAINTENANCE