User`s manual

2-5 LiveBroadcast
Live Broadcast allows clients from different IP to watch the same program as the host via
internet. Before using Live Broadcast, please make sure that the host and the clients are
already connected to the internet.
*R or
controls that are identical with those on
the control panel of TV mode.
efer to the Control Panel section f
Live Broadcast Switch
1
Stop
2
Stop
Click to stop Live Broadcast, and
turn back to TV mode.
9
2
Live Broadcast Switch
Click to start/stop Live Broadcast.
The icon lights on, when Live
Broadcast mode is on.
1
Control Panel
Note:
Live Broadcast requires the
host with a public IP, and
dose not support a virtual IP.
For the Host:
Click the Live Broadcast button on the
control panel then a setting window will
appear (as Fig. 22).
First choose Media type and Video Multiple
bit rate from the drop-down list, and enter
the number of the clients (max. 5) to share
the program with.
When the function Silence Live Broadcast
is checked, TV screen of the host will not
show up after Live Broadcast starts.
Please provide the URL shown on the
window to the clients after click OK.
For the CLIENTS:
Please open the Windows Media Player
and click File and choose Open URL. (Fig.
23)
Enter the URL obtained from the host and
click OK. When the buffering percentage
shown at the bottom of the window
reaches 100%, the clients can enjoy Live
TV from the host.
Fig. 22
Fig. 23
How to Use Live Broadcast
WinFast PVR2 Software Manual
2
WinFast PVR2 Software Manual
2
TV MODE
26