User's Manual

Network Configuration (Only available when connect directly)

Connect the device to Router so that you can control it via internet. And it can't be changed after

successful connection.

Default Restore

Touch to reset the device to its factory default settings.

Firmware Update(Only available when connect through LAN)

Touch this item to update the device's firmware version. Before update, please make sure that your

mobile device and the device are in the same router and can access the Internet.

Follow these steps to update firmware:

1. Touch "Firmware Update" to check the new versions.

2. Select the update version in the news versions list as right, then

touch "Update". (It supports updating to lower version, and you

can get the change history in the Online Help page.)

3. The update process will last about 90 seconds, please don't

move or turn off the device during that.

4. When finished, it will pop up the success dialog box and the device will automatically restart,

then you can reconnect it to control. (If there is a failure warning, please redo the above steps.)