User's Manual

12
Configure via Direct Connection Mode
1. Plug the device into the power socket. Then hold down the on/off button for about 4 seconds
until the indicator turns off, and then release the button.
2. Make sure that the device is in the direct connection mode (flashing once every 0.5s). Touch
"Settings" -> "WiFi" of the mobile device, and then touch the device SSID to connect it. (Not
secured, SSID: S202xxxxxxxx, xxxxxxxx is the last eight characters of its MAC address.)
3. Start the APP, and it will automatically login the device.
Note: For iOS devices, it may take about one minute to connect the device for the first time.
Please start the APP after it displayer the " " icon.
4. In the home page, touch " " -> "Settings" -> "WLAN" and select the WiFi router and type its
password to configure it, and then it will automatically restart.
5. Connect your mobile device to the wireless network, and then you can use the APP to control the
device remotely.