User's Manual

10
Network Configuration
Smart Network Configuration
1. Make sure that the mobile device has been connected to a
WiFi Router. Start the "amor Power" APP and touch " " in
the device list page to enter the network configuration page.
2. Plug the device into the power socket, and make sure that
the WiFi indicator is slowly blinking. Then touch "Next".
If the indicator is not slowly blinking or you want to
reconfigure the device, please use the APP to reset it, or
replug it into the socket while holding down the first on/off
button and continue to hold it down for about 4 seconds
until the indicator turns off to reset it.