User's Manual
- -
3
4 Operation
4.1 Hardware Description
The PowerPack for Earthmate GPS with Bluetooth has two LED light which each has two colors. One
is GPS & Charge status LED, that is named LED 2, and the other is Bluetooth & low power status
LED, that is named LED 1. The status table of LED shows as follows:
<State Table of LED>
LED1
Bluetooth & UART transmitting status Description
LED1 Color and Action Bluetooth Active UART Active
Blue(Bluetooth status)
Yes No
Yellow(UART transmitting status)
No Yes
<Note>When you use RS232 DB9 cable to connect PowerPack and enable the UART transmission,
Bluetooth function will disable and the LED 1 only shows yellow.
LED2
Lithium Battery Status&Charge LED Description
LED2 Color and Action Battery Charged Low Powered
Dark No No
Green Solid Yes No
Red No Yes
4.2 Turn on/off
Notice You have to install the Earthmate GPS receiver to PowerPack
device before the PowerPack for Earthmate GPS with