User's Manual

Leadtek GPS LR9553D Bluetooth Data logger & Receiver
©2007 Leadtek Research Inc. All rights reserved.
14
Data transmission display
When there is data flow, it will blink.
COM Port Used
It shows the number of the Com Port Used.
Baud Rate
It shows the transmission rate.
4. Positioning information
Lon
The longitude at that the user is.
Lat
The latitude at which the user is.
Date & Time
The date and time will be shown in GMT (Greenwich Mean Time)
which is calculated
by the satellites. If you want to change the
time which you are located in, just press the square button
beside “Time” to adjust the time.
HW Reset
To reset the default value, such as cold start, warm start, hot
start, factory and so on.
Step 2
Turn on the power switch, you can choose the mode of navigation and log both or the mode of
log only for more operation time.
Step 3
When the memory is full, the green light will be constantly on and the data logging will be
ceased. You should now download the data to your computer and then the data logging will