User's Manual

Leadtek GPS LR9553D Bluetooth Data logger & Receiver
©2007 Leadtek Research Inc. All rights reserved.
11
6. Test Leadtek GPS LR9553D
Step 1
Before testing Leadtek GPS 9553D, make sure that you have charged for 3 hours till the red
light is off and installed "Leadtek Navigator” to your computer. Turn on LR9553D, and use the
USB cable to connect your computer and LR9553D. Once connected, follow the instruction as
below for testing.
1.Open WinFast Navigator and you will see the screen showing ：
2.Software manual ：
( 1) Tool bar:
Connect
After pressing “Connect”, please choose appropriate Com Port and Baud rate. If there
remains
no response for 5 seconds, the window will pop up again. Please choose the
right Com Port and Baud rate again.