Leadtek GPS LR9553D Bluetooth Data logger & Receiver Leadtek GPS LR9553D Bluetooth Data Logger & Receiver Product ID: Leadtek GPS LR9553D Leadtek GPS LR9553D Bluetooth Data logger & Receiver Version A June 2007 Headquarters of Leadtek Research Inc. 18F, 166 Chien-Yi Rd., Chung Ho City, Taipei County 23511, Taiwan TEL: +886(0)2 8226 5800 FAX: +886(0)2 8226 3087 http://www.leadtek.com E-mail: service_gps@leadtek.com ©2007 Leadtek Research Inc. All rights reserved. ©2007 Leadtek Research Inc.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver TABLE OF CONTENTS 1. Introduction...........................................................................................................3 2. 3. 4. 5. Features................................................................................................................4 Hardware ..............................................................................................................5 Package Contents..........................................
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 1. Introduction Thank you for purchasing Leadtek GPS LR9553D. Leadtek LR9553D, based on cutting edge SiRFStar III technology, is a high performance, low power, 20-channel GPS data logger and receiver with wireless capability. As such it is a highly compatible Bluetooth solution with extraordinary configurability and sensitivity. Not to forget its appealing ergonomics—sleek, round and lightweight.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 2. Features 20-channel all-in-view tracking Cold/Warm/Hot Start: 42/35/1 sec. respectively Reacquisition time: 0.1 sec. Built-in rechargeable and power-saving battery Operation time: 10~12 hours, in continuous mode Built-in high WAAS for accurate navigation Neck strap eyelet design, easy to carry Data logging up to 240 hours 3-mode slide switch: Off/Navi & Log/ Log only Interface: BT/USB ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 3. Hardware 1.USB connector (Charging & GPS data downloading) 2.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 4. Package Contents Leadtek GPS LR9553D Bluetooth data logger and receiver x 1 Leadtek Navigator & Locr PC client CD ROM x 1 Warranty Card x 1 Quick Guide x 1 Neck eyelet strap x 1 USB cable x 1 Car charger x 1 Travel charger (optional) x 1 ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 5. Install Leadtek Navigator (PC) Step 1 Before installing Leadtek Navigator, make sure that you have installed Microsoft ActiveSync to your PC. Insert the software CD-ROM into the CD-ROM drive. The following screen should appear automatically. If not, run “install.exe”. Click “Leadtek Navigator” to initialize installation. ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver Step 2 The installation dialog box and the copyright statement appear. Click “Next”. ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver Step 3 The dialog box of Destination Location appears, showing the default destination folder. To change it, click Browse to select a different folder for installation. If you do not wish to change the destination folder, click "Next". Step 4 Select ”Leadtek GPS Products”, and then click “Next”. ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver Step 5 Installation is in progress. Step 6 Once the installation is complete, check your PC screen to see if additional steps are required to complete the installation. Click "Finish". ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 6. Test Leadtek GPS LR9553D Step 1 Before testing Leadtek GPS 9553D, make sure that you have charged for 3 hours till the red light is off and installed "Leadtek Navigator” to your computer. Turn on LR9553D, and use the USB cable to connect your computer and LR9553D. Once connected, follow the instruction as below for testing. 1.Open WinFast Navigator and you will see the screen showing ： ： 2.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver Close/Exit Close WinFast Navigator. Help Software manual. Minimize Minimize WinFast Navigator. Close/Exit Close WinFast Navigator. (2) GPS information and signals When the device and the computer are correctly connected, the received GPS data will be shown on the window of “Development Data View”. The strength of GPS signals will be displayed on the window of “Signal View”.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver b This number represents for the code of the satellite, and the color display can be . referred to part a. 3. Connection information This part explains the status of the speed and direction while navigating and the connection between the device and the computer. Speed It shows the current speed of the navigating object, in kilometers/hour. Direction It shows the current direction of the navigating object.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver Data transmission display When there is data flow, it will blink. COM Port Used It shows the number of the Com Port Used. Baud Rate It shows the transmission rate. 4. Positioning information Lon The longitude at that the user is. Lat The latitude at which the user is. Date & Time The date and time will be shown in GMT (Greenwich Mean Time) which is calculated by the satellites.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver continue. If the red light is quickly blinking while logging, which means the power is low, you should immediately charge for the continuous data logging. ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 7. Install the USB Driver Install the USB driver before connecting the USB cable. Step 1 Insert the CD-ROM into the CD-ROM drive. Click “USB Driver” to proceed. ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver Step 2 The screen will display the following options. Click to select the option you desire. Click Next to continue. Step 3 Click “Finish” to finish the installation. ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver Step 4 Reboot the computer and then connect the USB cable. ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 8. Appendix A: Limited Warranty Leadtek warrants to the original purchaser of this product that it shall be free of defects resulting from workmanship or components for a period of one (1) year from the date of sale (The region of Europe is exceptional, see the warranty card enclosed for the validity). Defects covered by this Warranty shall be corrected either by repair or, at Leadtek's discretion, y replacement.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 9. Appendix B: Specifications Technical Performance Feature Chipset General Accuracy Datum Time to First Fix (TTFF) (Open Sky & Stationary Requirements) Data Log Dynamic Conditions Power Item GSW3 Frequency C/A code Channels Position Velocity Time Default Reacquisition Hot start Warm start Cold start Description SiRFStarIII LP technology L1, 1575.42 MHz 1.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver Interface Specifications Items Description Mini-USB connector Power Recharge & GPS data download Bluetooth Frequency Compliant Compliant Profile Bluetooth Operation Range 2.4GHz ISM Band Bluetooth Specification v 1.2 Series Port Profile (SPP) 10 M Electrical Main power input Power consumption Backup Power Operation Time 5±5%(10%)V DC input 0.4W@3.3VDC (Full Power) 1.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver Environmental Characteristics Items Description Operating temperature range -10 deg. C to +50deg. C Storage temperature range -20 deg. C to +65 deg. C Physical Characteristics Items Description Length 60.2 mm (2.37 in) Width 33.0 mm (1.30 in) Height 17.8 mm (0.70 in) Weight 48 g (including rechargeable battery) ©2007 Leadtek Research Inc. All rights reserved.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 10. Appendix C: Safety Information GPS is operated by the US government, which is solely responsible for the system’s accuracy and maintenance. Although Leadtek GPS LR9553D is a high precision electronic NAVAID, it may still become unsafe under the circumstances of misuse or inaccurate reading. Hence there is a certain degree of risks involving the use of these products.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver 11. Appendix D: GPS FAQ Q. Do I have to pay extra charges for receiving GPS signals? A. No. Like listening to the radio, you only need to buy hardware (PC+GPS or PDA+GPS) to access the service. There is no extra charge. Q. I bought a GPS device in Taiwan. Can I use it abroad? A. Yes. GPS signals cover 98% of Earth’s surface (except the North and South Poles), so you can use it around the world. Q. What datum does GPS devices use? A. It uses WGS 84. Q.
Leadtek GPS LR9553D Bluetooth Data logger & Receiver Q. Why can’t I use GPS at home or near the window? A. GPS is for outdoor navigation only, so your device cannot receive GPS signals at home. Especially because it usually takes longer to navigate when you use GPS for the first time, make sure that you are in an outdoor place with good signal reception. Q. When do I need to run Cold Start? A.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
