User's Manual

.
- - 6
4.2. Turn on/off
Turn on To turn on the receiver, press the power button on the topside briefly (0.5 seconds).
The left LED(LED 2) indicator will flash briefly. The right LED (LED 1) indicator will
start flashing.
Turn off To turn off the receiver, press the power button on the topside for 3 seconds. The
LED indicator will flash briefly before switching off the receiver.
4.3. Charging
Low Power The right LED(LED 1) indicator will turn RED (normally BLUE) when battery power
becomes low. Connect the receiver to a powers source to continue operation and to
recharge the battery.
Charging The left LED(LED 2) indicator will turn RED (or ORANGE) when the battery is
being charged. When fully charged, the RED indicator will switch off.
4.4. Bluetooth Communication
Waiting to connect The right LED(LED 1) indicator will flash if there is no communication between the
receiver and another device.
Connected The right LED(LED 1) indicator will turn to continuous lighting when the receiver is
connected through the wireless link with another device.
4.5. GPS
Navigating The left LED(LED 2) will flash GREEN (or ORANGE when charging) if the receiver
is able to determine the current position.
4.6. PIN CODE
The PIN code means Personal Identification Number for Bluetooth device and it is also called as
Pass Key. The Bluetooth GPS receiver has the default PIN Code, and is “0000”. Generally speaking, there
are two steps in Bluetooth connecting. One is pairing process, the other is link process. If you need PIN
code to pairing and connect, you can use the default pin code, “0000” to connect Bluetooth device. Our
GPS receiver belongs to non-safety connecting, you can use in general application to finish connecting.
5. What do you get in the box?