User's Manual

17
APS
APS Configuration
Auto Provision System purpose is provided
device specify configuration and account info
from the provider.
Click to ¡System¡  ¡APS¡ , and set
the options ¡ON¡ to enable APS.
Click to ¡System¡  ¡Other¡, and
press the ¡Execute¡ button to reboot
for settings taken effect.
NOTE:
 Ensure that your network environment could connect to the Internet.
 During the downloading process, both amber LEDs will flash to show it was in the process.
 This process may take 20 to 30 seconds which depends on Internet traffic situation.
 After process finished, both amber LEDs will be off.
 Please reboot the WinFast CarePhoneR for the full function working properly after APS
process finished.
 Network Camera will download the customized configuration files, and the detail will be
displayed in SIP page.
Web GUI