User's Manual

7
3.2.1.3 Inrush Current
The inrush current will not exceed 50A at 230V AC, input and Max load for a cold start at
25°C.
3.2.1.4 Stand-by Power
The input power should be less than 0.3W with No-Load.
3.2.1.2 Output Parameters
Output Data
Spec. Limit
Test Condition
Min
Value
Typical
Max
Value
Output Voltage
4.75
5.00
5.25
0~1.0A loading the voltage was
measured at USB socket
Current
1.0A
-
Ripple and Noise
-
-
120mVp-p
20MHz bandwidth 10uF Ele. Cap
0.1uF Cer. Cap, At115/230V AC
input voltage and full load
Output power
-
-
5W MAX
MAX. load(1.0A) &100-240V AC
3.3. Environment Specification (Reliability Test Plan)
3.3.1. Mechanical
Items
Test Items breakdown
Specification
Mechanical Test
1.Transportation Package
drop 80cm