User's Manual

5. Installation

5.1 Quick Installation Step

(1) Prepare your WiFi router or 3G SIM card, and make sure that it can work properly.

For the settings of WiFi router, please refer to your service carrier's manual.

(2) Open amor H100 cloud gateway and take out the contents.

(3) Plug power adapter into a power outlet and power adapter port on the H100.

(4) Turn on gateway power switch. (“O” presents as turn off, “―” presents as turn on) if the

power doesn’t auto on when power adapter is plugged.

(5) Please register a USER ACCOUNT on amorRunner health cloud before measuring

vital sign. (

https://www.amorrunner.com/amorRunnerWeb/index.jsp)

(6) After finishing the procedure of registration on health cloud you can add a member

account on H100.

Congratulations! You have completed all the installation.

5.2 About Installation Location

CAUTION!

• For safety reason and to obtain the best wireless transmission efficiency, place the

Gateway in a wide open area.

• To avoid the transmission interference, do NOT place the gateway in the following

environments:

■ On, near, or covered by metal substances

■ Near other wireless devices

■ Near a microwave or an induction cooktop

■ In a closet or covered by other substances unable to receive signals

Please confirm the usability of AC power adapter in your country before plug to the

gateway, or the gateway will be damaged.