User's Manual

1.0 Setting Up
5
1.3.2 Sleep Mode
The sleep mode will initiate after five minutes
of inactive use. Pressing the touch screen or any key
on the remote will reactivate the display.
1.3.3 Removing and Inserting the MVP into its cradle
1. To remove the MVP, gently pull on the unit
and separate it from the cradle.
2. To insert the MVP into the cradle, make sure that
the MVP is face-up and that the cradle’s port is fully
inserted into the MVP. If it is not fully inserted, the
MVP’s battery will not charge.
The screen display indicates the battery status
in the upper right corner with the battery icon.
When the MVP is fully charged, the battery will
appear full. When there is one bar or zero bars
left on the battery, it is time to recharge the MVP.
•