User's Manual

Touch Calibration:
This function can be used to calibrate input via the touch screen.
Tap on the “Start” button to start the calibration.
The screen will turn blank, with a crosshair at the upper-left corner.
Tap on the center of the crosshair.
Four more crosshairs will appear in the following sequence: lower-left
corner, lower-right corner, upper-right corner, and center. Tap on the
center of each of the crosshairs.
When you have tapped on the five crosshairs, you will be asked to tap
on the five places again. Follow the instructions on the screen. Then
tap on the “Done” button to finish the calibration.
59