User's Manual

14
There is a built-in microphone next to the camera. All audio input is
received by the built-in microphone. The volume of the microphone
can be adjusted in the settings menu.
Microphone
The power indicator is located to the right of the event indicator. It
indicates the power status as per the following:
!
Green: Power is on
!
Flashing Green: Battery is being recharged
!
Red: Battery is low and requires recharging
Power indicator
This button turns the unit on and off when held down for 3 seconds.
Power button
The audio output is transmitted through the built-in speakers on each
side of the screen. The volume of the speaker can be adjusted in the
settings menu.
Speakers
Your has a seven-inch touch screen display panel,
providing you with the ability to control your without a
remote control, mouse, or keyboard. The touch screen allows you to
make or receive a call with the fewest steps possible.
AMOR 8A10
AMOR 8A10
Touch screen
Event indicator
Event Flashing Frequency
New Message
Missed call
Unread / unheard message
Sleep mode
0.7 second on / 0.7 second off
0.1 second on / 1 second off
When some events occur, this indicator will light in the following
pattern:
!
Flashing Blue: See the table below.
!
Flashing Blue twice: When the power button is pressed for 2
seconds to turn on / off AMOR 8A10.
!
Amber: Network or SIP is disconnected.
!
Flash blue and amber alternately: Firmware is being updated.