User's Manual

Printer Setup

Take out the ink cartridge from the package and

remove the printhead cap.

Do not touch the inkjet head or soft plate electrodes

at the bottom of the cartridge to avoid any damage

or oxidation.

Please do not discard the printhead cap. When the

printer is not in use, please remove the ink cartridge

and put the printhead cap back on.

Warning

Open the cartridge latch and slowly insert the ink

cartridge from the back of the printer. When the

cartridge is properly installed, the printhead is

exposed at the front of the printer. Please make

sure that the ink cartridge is properly installed in

the handy printer.

During installation of the ink cartridge, please do

not bump into the wafer detector or ink cartridge

detector. This may cause damage to the detectors

or poor printing.

Please use the printhead cap after printer usage. The

cap protects the inkjet head from foreign materials as

well as drying.

After checking that the cartridge is properly installed

in the printer, close the cartridge latch. At this point,

the ink cartridge is securely installed in the printer.

Do not touch

The actual ink cartridge may differ slightly from the one depicted in this manual.

Ink Cartridge Installation

Warning

Please turn off the power when installing or removing ink cartridges.