User's Manual

38
G1
MSG: 00
INK:100%
BAT:100%
Prev Next Set
Please discard used ink cartridges in accordance with local disposal or recycling requirements.
To purchase additional cartridges, please consult the distributor for the best cartridge to use.
Troubleshooting
10
When the ink level is low, the INK LED will light up.
The INK LED lights up when the ink level is below 20%. When the ink
level is below 10%, print quality will begin to decline.
The INK LED will remain lit until the cartridge is empty. When the
cartridge is empty, please replace it with a new one.
You can change the level at which the INK LED lights up through the
firmware settings.
Ink Level
RUN ERR INK BAT PWR
You may use the provided battery charger or the provided AC power
adapter to recharge the batteries.
(Please see P6. Parts and Accessories)
Please discard used batteries in accordance with local disposal or
recycling requirements.
If additional rechargeable batteries must be purchased, please follow
the specifications listed in the manual.
When the battery level is low, the BAT LED will light up.
When the BAT LED is lit, the printer cannot perform any printing
operations. The screen preview will display “battery low”.
To return the printer to normal function, either replace the
rechargeable batteries, recharge the batters using the provided
battery charger, or use the provided AC power adapter to turn on
the printer.
(Please see P10. Turning on the Printer and P11. AC power)
Low Battery
RUN ERR INK BAT PWR
Warning
Warning