User's Manual

33
Function Items Description
Configuring Active Nozzles
The nozzles in use can be configured based on your printing needs.
Use of different nozzle modes will result in different print results.
Both
Configure the printer to use all
nozzles
Even
Configure the printer to use only
even nozzles
1
2
Touch the icon to modify nozzle setting.
Then choose the setting between using all nozzles(“Both”),
just even nozzles(“Even”), just odd nozzles(“Odd”), or Auto
mode.
3
Touch the OK key to save this setting.
Odd
Configure the printer to use only
odd nozzles
Auto
Configure the printer to use auto
setting
Using “both” will result in darker print results.
If the printing surface is rough, “both” mode may result in undesirable print results. For uneven surfaces, use
of “even” or “odd” modes is recommended.
Print density will affect the printing results in these three modes. Please see the next page for more information
about print density.
It is recommended not to use “both” mode for fine printing (e.g. detailed images, barcodes, QR codes).
Warning
Nozzle Direction
Density Dynamic SN
Purge Print Information
Adv. Setting Home
AUTO (EVEN&ODD)
EVEN (300DPI)
OK Cancel
ODD (300DPI)
BOTH (600DPI)
AUTO (EVEN&ODD)
EVEN (300DPI)
OK Cancel
ODD (300DPI)
BOTH (600DPI)