User's Manual

Please discard used ink cartridges in accordance with local disposal or recycling requirements.
To purchase additional cartridges, please consult the distributor for the best cartridge to use.
Troubleshooting
10
When the ink level is low, the INK LED will light up.
The INK LED lights up when the ink level is below 50%. When the ink
level is below 50%, print quality will begin to decline.
The INK LED will remain lit until the cartridge is empty. When
the cartridge is empty, please replace it with a new one.
You can change the level at which the INK LED lights up through
the firmware settings. (Please see 37. Firmware Settings)
Ink Level
RUN ERR INK BAT PWR
You may use the provided battery charger or the provided AC power adapter to recharge the batteries.
(Please see P6. Parts and Accessories)
Please discard used batteries in accordance with local disposal or recycling requirements.
If additional rechargeable batteries must be purchased, please follow the specifications listed in the manual.
When the battery level is low, the BAT LED will light up.
When the BAT LED is lit, the printer cannot perform any printing
operations. The LCD preview will display “battery low” and
“Error 2 Icode error.”
To return the printer to normal function, either replace the
rechargeable batteries, recharge the batters using the provided
battery charger, or recharge the batteries using the provided AC
power adapter.
(Please see P10. Turning on the Priner and P11. AC power)
Low Battery
RUN ERR INK BAT PWR
41
Warning
Warning