User's Manual

Function Items
Description
Function Items
Description
Configuring Print Density
Change print density.
1
Normal density
2
High density (darker)
1
2
Press the function key to enter settings configuration mode.
Use the selection keys to select “d” or DENSITY mode,
then press the confirmation key.
Use the selection keys to switch between the two or four
firing modes, then use the confirmation key to save your
selection.
If ACTIVE NOZZLE is set to “BOTH”
M o d e
DENSITY
3
Press the confirmation key to save all changes.
Once everything is successfully changed the printer will beep.
M o d e
3
M o d e
1
1
Normal density
2
High density (darker)
if ACTIVE NOZZLE is set to “EVEN” or “ODD”
3
Higher density (even darker)
4
Highest density (darkest)
There are only two settings when ACTIVE NOZZLE is in “BOTH” mode (normal and high).
There are four settings when ACTIVE NOZZLE is in “EVEN” or “ODD” mode.
35
Warning