User's Manual

Settings Description
Display: C (AUTO SPIT Mode), Press the confirmation key to modify this setting.
Then use the selection keys to switch between different time lengths (0-90 seconds).
When powered on and not printing, the printer can periodically release a very small
amount of ink from the printhead for cleaning purposes.
This setting configures the time interval between releases. If the interval is set to “0”
this setting will be disabled.
Display: R (Mode RESET), Press the confirmation key to reset all settings to the
factory default. Press the confirmation key a second time to confirm the rest.
(Please see P38. Resetting the Printer to Factor Default Settings)
AUTO SPIT
(AUTO SPIT Mode)
Activates the auto cleaning
function of printhead to
prevent the nozzles from
clogging.
RESET
(Mode RESET)
Reset the initial default
setting values.
1
Please press the function key to enter the setting configuration
mode.
You can use the select key to select the setting to be configured.
2
M o d e
FIRE
M o d e
PURGE
P R I NT
Moving between Settings
30