User's Manual

11
1
Make sure the AC power adopter is plugged in to the
printer and the AC power socket. When the power is
connected, the battery charging light will turn on
indicating charging status.
You must place the four rechargeable in the battery
compartment in order to operate the printer using
the AC power.
2
Turn on the power switch.
You will hear the power on sound and the PWR LED will
light up.
The printer can print and charge the batteries at the same
time if the AC adapter is plugged in.
AC Power
The AC adapter does not need to be plugged in during printer operation, but it can be plugged in to charge the
batteries.
AC Power Adapter
The four rechargeable batteries must be placed in the battery compartment in order to connect to the power
adapter.
The actual AC Power adapter may differ slightly from the one depicted in this manual.
RUN ERR INK BAT PWR
The four rechargeable batteries must be placed in the battery compartment in order to operate the printer.
In order to charge the batteries using the AC power adapter, the batteries must be placed in the battery
compartment.
The four rechargeable batteries must be placed in the battery compartment in order to print using AC power.
Warning
Warning