User's Manual

Sound Bar Operations
Initial configuration
• After you connect the sound bar and the subwoofer to power supply, the system
will turn on automatically after connection.
• The sound bar and the subwoofer has been paired. No pairing is needed.
• The recommended connection from the sound bar to the TV is HDMI(ARC).
HDMI cable is included to provide optimal audio experience with this system.
System operations
1. Surround sound mode
• Press the “
” button on the remote control to turn the surround sound eect
on or o.
2. Adjusting volume
• Press the Volume +/- buttons on the remote control to increase/decrease the volume.
• Press the Mute button to mute volume. To unmute, press the mute button again or
press Volume +/- button.
3. Equalizier Adjustment
• Adjust the bass: press the “
” Equalizer button on the remote to enable bass
adjustment. Please make sure the 3 left-most indicator LEDs on the sound bar
flashes 3 times simultaneously to confirm that the bass adjustment has been
enabled. Use the Volume +/- to adjust to adjust the bass up or down.
• Adjust the treble: press the “
” Equalizer button on the remote to enable treble
adjustment. Please make sure the 3 right-most indicator LEDs on the sound bar
flashes 3 times simultaneously to confirm that the treble adjustment has been
enabled. Use the Volume +/- to adjust to adjust the treble up or down.
• Note: Please refer to the LED Indicator Light Overview for more details to
understand when bass or treble adjustments are enabled.
4. Play audio via Bluetooth
• Connect the sound bar to an external Bluetooth device (such as iPad/iPhone/
Android phone) via Bluetooth and enjoy music on the connected device using
the sound bar.
• Press the Bluetooth button on the sound bar or remote control to turn on
Bluetooth and enter pairing state. The Bluetooth indicator (white) on the sound
bar will flash quickly.
• Turn on Bluetooth on the external device, and search for and select “LHT-V16S”.
• Note: Connecting the sound bar to the TV via Bluetooth is not recommended
as it will not provide the optimal audio experience. We strongly recommend
using HDMI (ARC) connection with your TV.
• When the Bluetooth indicator on the sound bar is glowing white, the connection
is established.
5. Auto standby mode
• If the sound bar stays idle and receives no signal for 30 minutes, it will
automatically enter standby mode. (Please note: after entering auto standby
mode, press the power key to wake up)
6. Pairing with the subwoofer
• When you turn on the sound bar and subwoofer, they will pair automatically.
• Please pair the subwoofer manually if no sound is coming from the subwoofer.
• Press and hold the “Link” button on the back of the subwoofer for more than
3 seconds, to enter the pairing state.
• Then press the “Bluetooth” and the “Source” buttons on the sound bar
simultaneously for more than 2 seconds. The sound bar and the subwoofer
will connect wirelessly.
• Note: During the pairing process, the indicator light on the sound bar will change
accordingly. Please refer to the LED Indicator Light Overview for more details.
7. Restoring factory settings
• To reset the sound bar, press and hold the Source, Volume + and Volume -
buttons for more than 2 seconds, and the sound bar will automatically shut
down and restart.