User Manual

（completed by artist）
BI. Common Function Description
Power-on Status: Press the Power Button to turn the speaker on and it beeps simultaneously with the blue indicator
flashing. Press the Power Button to ture the speaker off
Bluetooth Connection: Once switched on, the speaker starts searching for other Bluetooth devices automatically and at
the same time, the blue indicator goes on and off. When found a Bluetooth device, the speaker prompts
whether to pair up or not. If selected Yes, it pairs up with the device and meanwhile, the blue indicator
flashes slowly and a beep is also generated by the speaker. If failed to detect any other Bluetooth device
within 10 minutes, the speaker will shut itself down. Turn it back on again to start search. All the paired
devices will engage in automatic connection when the speaker is turned on.
Hints: Please recharge when the battery loses its power considerably or the connection is failed.
Bluetooth Music Playback: When connected, the speaker plays music immediately . While playing music, Move and
hold the shake button +\- to adjust the volume. While playing music, Move shake button to select
tracks upwards or downwards. While playing music, press shake button to pause and press again to resume.
Call Pick-up: When connected, the speaker plays music immediately, the speaker beeps when a call comes in., it beeps；
press shake button to pick it up and to terminate conversation .Press shake button again to end
conversation. Press and hold to reject pick it up.
AUX Playback: Use the supplied audio cable to connect the speaker to another music player such as computer by
plugging one end to the speaker's AUX port and the other end to the music player's audio port. When the
music player starts playing music, the speaker sounds right away. Move and hold shake button +\- can
adjust volume.
Intelligent Quick Recharge: Recharge can be performed in the standby mode or power-off situation. Before recharging, plug
the mini-USB end of the supplied USB cable to the speaker's USB port and the other end to the USB port of the
computer or the USB recharger. When fully recharged, the red indicator goes off.
VIII. Compatibility
IX. Compatibility
BLUETOOTH V4.0 include below devices：A2DP、HFP、AVRCP。Support mobile phone , ipad PC as well
as a majority of intelligent devices that support Bluetooth.
X. Toubleshooting
Faults
Phenomena
Solutions
1.Check whether the speaker is still in the process of search or switch it
off and then
on.
Unable to pair up with other devices
2.There are too many Bluetooth devices in the proximity that cause
difficulty in
connection. Please turn them off.