User manual

Layout-Light-Control Light-DEC – Manual
- 23 -
With the key ABOVE or BELOW you can select
between Examples and Blank.
>Examples< is for the possibility that output-functions will be preinstalled for the
first Light-Display-Module (LDM). If you select >Blank< there will be no output-
functions as factory-setting preinstalled.
If you selected one of the two possibilities you can
proceed with the key RIGHT to the security
request.
With the key ABOVE or BELOW you can select No
or Yes.
If you leave now the request with the key LEFT by No there will be no factory setting
performed.
If you leave the request with the key LEFT by Yes
there will be the factory setting performed. The
installation can last up to 15 seconds.
Than will be the usual operation mode indicated
and Light-DEC will start with day phase:
Made in Europe by
Littfinski DatenTechnik (LDT)
Kleiner Ring 9
D-25492 Heist/Germany
Phone: [phone] / 977 381
Fax: [phone] / 977 382
Internet: http://www.ldt-infocenter.com
Subject to technical changes and errors.
 06/2016 by LDT
Factory setting
>Blank<
Factory setting
>NO<
Factory setting
>YES<
Install
Factory setting
Light-DEC VX.X
23:30:00 A 300