User manual

Using the Kabel Booster 1m on Märklin Control Unit and Booster 6017 / 6015:
The opposite sketch shows
the correct connection of the
Kabel Booster 1m on the
Märklin Central Station and
Märklin Booster 6017.
B
0
L
0
B
0
L
0
Booster 6017 Control Unit
weiss
white
weiss
white
The opposite sketch shows
the correct connection of the
Kabel Booster 1m on the
Märklin Central Station and
Märklin Booster 6015.
B
0
L
0
B
0
L
0
Booster 6015 Control Unit
weiss
white
weiss
white
Further products from the Digital-Professional-Series:
S-DEC-4
4-fold turnout decoder for four magnet accessories with free programmable decoder addresses and possible external power supply.
SA-DEC-4
4-fold switch-decoder with four bistable relays and free programmable decoder addresses and possible external power supply.
LS-DEC-DB, -DR, -KS, -ÖBB, -SBB, -NS, -NMBS, -BR, -FS, -SNCF, -SJ
4-fold light signal decoder. Light signals switched directly via decoder addresses.
RM-88-N / RM-88-N-O
16-fold feedback modules for the s88-feedback bus. RM-88-N-O with integrated opto coupling.
RM-GB-8-N
8-fold feedback modules with integrated track occupancy detectors for the s88-feedback bus.
HSI-88-(USB)
High Speed Interface for the s88-feedback bus. Offers the possibility to create three feedback lines. The feedback reports will be
transmitted directly via the command station via the COM- (HSI-88) or the USB-Interface (HSI-88-USB) to the PC.
Made in Europe by
Littfinski DatenTechnik (LDT)
Kleiner Ring 9
D-25492 Heist/Germany
Phone: [phone] / 977 381
Fax: [phone] / 977 382
Internet: http://www.ldt-infocenter.com
Subject to technical changes and errors.  07/2015 by LDT
Märklin is a registered trademark