User manual
HSI-88-USB – Manual
-
6
-
3. HSI-88-USB connection to the digital layout:
The HSI-88-USB will get the power supply via the 2-poles connection clamp KL1. The
voltage is acceptable within the range of 14.18V~ (alternated voltage of a model
railway transformer).
If you use the interface HSI-88-USB on a 3L-System (track with middle conductor from
Märklin) you can use feedback modules which are switching against ground.
In this case please attend to the correct connection of the supply cables “brown”
(this is system ground) and “yellow”. The connections at the clamp KL1 is
accordingly marked.
If the HSI-88-USB will get the supply from a model railway transformer the
connection “brown“ of the transformer has to be connected to “brown” of the
layout ground.
IN
10
9
11
8
7
6
5
4
3
2
1
12
13
14
15
16
KL6KL5KL4KL3KL2KL1
Littfinski DatenTechnik (LDT)
ST2ST1
Rückmeldemodul RM-88-N
16 - channel feedback module
Rev. 1.0
BU1 BU2
s88-N
OUT IN
s88-N
OUT
Digital-Profi werden!
16 Rückmeldeeingänge für den
s88-Rückmeldebus.
Rückmeldemodul
RM-88-N
L
ittfinski
D
aten
T
echnik (
LDT
)
D-25492 Heist
www.ldt-infocenter.com
s88-N
Littfinski DatenTechnik (LDT)
DiCoStation
Rev. 1.0
RIGHT MIDDLE LEFT
s88 Rückmeldebus
s88 feedback bus
14..18V~
br. gelb
ST5 ST4 ST3
Software by
Falkner
everytime u p-to-date
USB
ST1
LED1 LED2
STOPGO
++
ST6 EXT-PORT
BOOSTER
ST2
Digital-Profi werden!
Schnelles Computer-Interface für den s88 Rück-
meldebus. Ermöglicht drei s88 Rückmeldestränge.
High Speed Interface-88
HSI-88-USB
L
ittfinski
D
aten
T
echnik (
LDT
)
D-25492 Heist
www.ldt-infocenter.com
braun
brown
rot
red
gelb
yellow
braun
brown
Vom Modellbahntrafo
From transformer
Computer
RS232
Fahren und Schalten
driving and switching
Intellibox
gelb
yellow
braun
brown
Vom Modellbahntrafo
From transformer
Rückmelden
feedback
Computer
USB
B
B
H
H
B - Bremsabschnitt
slow-down section
H - Halteabschnitt
stop section
- Fahrtrichtung
drive direction
Bestell-
bezeichnung /
Order code:
Kabel s88 xm
weiss
white
S88- Rückmeldebus
S88- feedback bus