User manual

HSI-88-USB – Manual

5. The first driver will now be copied from the CD to your PC (image left side). Click

then onto the button “Fertig stellen” (“Complete”) (image right).

6. The PC recognizes now automatically that the loading of a second driver shall

be required (left). For this loading has the CD “USB-Drivers for DiCoStation and

HSI-88-USB” to be remain inside the disk drive.

Select now at the right side again “Nein, diesmal nicht” (“No, not this time”) and

click on “Weiter >” (“Continue >”).

7. Select now again “Software

automatisch installieren (empfohlen)”

(“Automatic installation of software

(recommended)” and click on “Weiter >”

(“Continue >”).