User manual

HSI-88-USB – Manual

2. USB-Driver Installation:

The Interface HSI-88-USB is an USB-Unit for the connection to an available USB-

Interface Port of the PC. The required USB-Connection-Cable will be supplied

together with each HSI-88-USB.

All USB-Units require a so-called USB-Unit Driver. The driver for the HSI-88-USB will

be available at the enclosed CD “USB-Drivers for DiCoStation and HSI-88-USB”.

The HSI-88-USB is a dual-purpose unit. During installation two drivers will be

loaded.

On the CD are USB-Drivers for the following PC operating systems available:

- Windows 8 / 8.1 (32- and 64-Bit)

- Windows 7 (32- and 64-Bit)

- Windows Vista (32- and 64-Bit)

- Windows XP

- Windows 2000

- Windows ME

- Windows 98

2.1 Connecting the HSI-88-USB to the PC:

Important Remark: For the installation of the USB-Drivers has the HSI-88-USB

connected to the PC only. All other connections of the HSI-88-USB will remain

without engagement.

1. Switch-on your PC and

connect the flat USB-Plug

of the enclosed USB-

Connection cable to an

available USB-Interface

port of the Computer.

Following connect the

square plug of the USB

connection cable to the

socket marked USB of the

HSI-88-USB.

The red Light Emitting

Diode of the HSI-88-USB

will lighten up and on the

PC-screen the info “Neue

Hardware gefunden” (“New

hardware found”) will be

shortly indicated.