User manual

HSI-88-USB – Manual
- 1 -
Content: Page
1. Preface / Safety Instruction 1
2. USB-Driver installation 2
3. HSI-88-USB connection to the digital layout 6
4. HSI-88-USB implementing into your model railway software 8
5. Firmware Update 9
1. Preface / Safety Instruction:
You have purchased the HSI-88-USB from the assortment of Littfinski DatenTechnik
(LDT) for your model railway.
The HSI-88-USB is an Interface for the s88-feedback bus. The driving and
switching will continue via your digital central unit. The time-critical feedback
reports will be transmitted via the HSI-88-USB to the PC respectively to your model
railway software without any delay.
Intellibox
Rückmelden
feedback
Littfinski DatenTechnik (LDT)
DiCoStation
Rev. 1.0
RIGHT MIDDLE LEFT
s88 Rückmeldebus
s88 feedback bus
14..18V~
br. gelb
ST5 ST4 ST3
Software by
Falkner
everytime up-to-date
USB ST1
LED1 LED2
STOPGO
++
ST6 EXT-PORT
BOOSTER
ST2
Digital-Profi werden!
Schnelles Computer-Interface für den s88 Rück-
meldebus. Ermöglicht drei s88 Rückmeldestränge.
High Speed Interface-88
HSI-88-USB
L ittfinski D aten T echnik ( LDT )
D-25492 Heist
www.ldt-infocenter.com
Fahren und Schalten
driving and switching
gelb
yellow
Vom Modellbahntrafo
From transformer
Computer
RS232
braun
brown
Computer
RS232
PC mit 1 COM- und 1 USB-Schnittstelle
PC with 1 COM- and 1 USB-interface
Erzwagenzug
S-Bahn
ET 85
We wish you to enjoy using this product!
This unit will be supplied with a 24-month warranty.
• Please read this instruction carefully. Claim of warranty will expire due to
damages caused by disregarding the instructions. We will not cover any liability
for the result of consequential damages. You will find this manual as PDF-File on
the enclosed CD “USB-Drivers for DiCoStation and HSI-88-USB”. This file can be
opened with the Acrobat Reader.