User manual

HSI-88-USB – Manual
- 10 -
4. For the following procedure has the HSI-88-USB to be connected via the USB-
interface to the PC. The model railway layout has not to be switched-on.
5. Call with a double-
click the program
“DiCoStation HSI-88”
from the Desktop and
click onto the section
“Update”.
Under “Installierte
Firmwareversion“
(“Installed firmware
version”): the present
version stored at your
HSI-88-USB will be
indicated.
If under “Verfügbare
Firmwareversion“
(“Available Firmware
Version“): a higher
version number will be
indicated please click
onto ”Firmwareupdate”.
Important Information: The device number should never be changed. Otherwise
the model railway software will not recognize the HSI-88-USB any more. The device
number will be important as soon as you use more than one HSI-88-USB or
additionally a DiCoStation for driving and switching. The first HSI-88-USB will get
automatically always the device number 1.
6. Click at the window
“Firmwareupdate” on “Ja”
(“Yes”).
7. During the updates should
be the USB-connection to
the HSI-88-USB not
interrupted. After a short
transmittance time which will
be indicated at two additional
windows please click under
the report “Firmwareupdate
erfolgreich abgeschlossen”
(“Firmware successful
completed”) on “OK”.