Specifications

Document is the property of LDL-Technology and cannot be
reproduced or transmitted without written consent
WUS MOTO Gen3 8,5mm
Rim Hole Mounting
process
Ref : C 318 072 0000
Version : A1
5.3. WUS SCREWING RECOMMENDATIONS
Make sure the following recommendations are respected :
Screwing speed : Typical = 1 turn per second ; Maximum = 2 turns per second.
¨ Apply a torque of 2,1 Nm +/- 0,1 Nm with the good screwing speed.
¨ For the manual process please use a torque controlled tool.
¨ The valve and the screw have to be screwed on 3 complete threads (3 Screw T15 rounds)
Minimum,
¨ Under no circumstance the wus case has to be in contact with the rim surface. You must be able
to introduce a feeler gauge between the sensor and the rim (minimum slack of 0,2mm is
required).
¨ Once mounted, the WUS must be distant from the rim as illustrated here under.
C318-072-0000-A2-WUS Moto Gen3 8.5 Mounting Specification.odt LDL Technology SAS
9/ 20 France
Copyrights 2019
Minimum 0,2mm