Specifications

Document is the property of LDL-Technology and cannot be
reproduced or transmitted without written consent
WUS MOTO Gen3 8,5mm
Rim Hole Mounting
process
Ref : C 318 072 0000
Version : A1
3. DESCRIPTION
The wheel unit sensor (WUS Gen 3) is a pressure and temperature sensor composed with:
• A molded black plastic housing,
• A metal Screw M5 with Torx T15 head, with a captive washer.
• An anodized aluminum valve oriented at 90° or a LSV type; including an EPDM seal and a short
core mechanism.
4. UTILISATION RULES
The Wheel Unit Sensor can be mounted on rim thickness 2,5mm to 8mm with Rim Hole 8,3 +0,3/0mm
and drop center width and depth according to sensor design.
Same request for LSV type, just think about accessibilty
of LSV holding with a 11mm flat wrench to apply counter torque
during screwing operation.
To validate mounting interface, ask to LDL (CAD data and tolerances of the rim are needed).
RIM HOLE : ETRTO 8,3+0,3/0mm
RIM Thickness : 2,5 to 8 mm
C318-072-0000-A2-WUS Moto Gen3 8.5 Mounting Specification.odt LDL Technology SAS
6/ 20 France
Copyrights 2019
Typical mounting