Specifications

Document is the property of LDL-Technology and cannot be
reproduced or transmitted without written consent
WUS MOTO Gen3 8,5mm
Rim Hole Mounting
process
Ref : C 318 072 0000
Version : A1
Disassembly of the second sidewall.
¨ Repeat the disassembly operations of the first sidewall until the tire is completely separated from
the rim.
¨ At any time the hand Tool or machine Tool must get in touch with the sensor.
C318-072-0000-A2-WUS Moto Gen3 8.5 Mounting Specification.odt LDL Technology SAS
18/ 20 France
Copyrights 2019
Slide the tool head
under the tire
With a tire iron, raise the second sidewall at 50° from the valve
Overview
Rear View
Step N°4
Step N°5
Step N°3
Then make the tire turn
to disengage the first sidewall
WUS