Specifications

Document is the property of LDL-Technology and cannot be
reproduced or transmitted without written consent
WUS MOTO Gen3 8,5mm
Rim Hole Mounting
process
Ref : C 318 072 0000
Version : A1
7. DISMOUNTING A TIRE EQUIPPED WITH A WUS
¨ Before detaching the tire, make sure that the Wheel Unit Sensor is still correctly mounted and
tightened on the rim, by checking that the valve is tightened.
¨ Before any introduction of tools between the tire and the rim, make sure that both sidewalls of
the tire are completely detached from the rim.
For clockwise tire mounting machine
C318-072-0000-A2-WUS Moto Gen3 8.5 Mounting Specification.odt LDL Technology SAS
16/ 20 France
Copyrights 2019
Grip the tire with the press
at 50° minimum from the
valve
With a tire iron, raise the first
sidewall at 50° from the valve
according to scheme next page
Step N°1
Step N°2