User's Manual

Document is the property of LDL-Technology and cannot be
reproduced or transmitted without written consent
WUS MOTO Mounting process mode
Ref : C 307 020 0010
Version : E2
5.4. DETAILED VIEWS OF WUS ASSEMBLY
C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS
9/ 24 Toulouse – France
Copyrights 2016
Step N° 1
The Spring side must
face the internal side of
the rim.
Electronic part including the
spring. This part is situated
inside of the tyre
RIM
Valve including the seal ;
situated on the external
part of the tire
Step N°2
The valve seal
must face the rim
valve hole on the
external side.